sE Electronics sE7 Matched Stereo Pair
Type |
---|
Stereo Set;stereo set microfoons (2)
€199.00
Voorraad: Weer leverbaar vanaf
|
enkele microfoon (1)
€99.00
Voorraad: Weer leverbaar vanaf
|
Officiele Merk Garantie
Bij ons: 4 JAAR GARANTIE!
4350+ Afhaallocaties in Nederland
2300+ Afhaalpunten in Belgie
Goedkoper of Duurder/BeterOm ook te bekijken: Eventuele goedkopere en andere/betere/beste alternatieven
Aanbevolen met
sE7 Matched Stereo Pair Details
E7 (Matched Pair)
2x sE7 microphone
2x mic clip (with thread adapters)
2x wind screens
High quality condenser capsule
designed for neutral, balanced sound quality
ultra-thin diaphragm for excellent transient response
cardioid polar pattern - ideal for most studio or stage applications
The quietest mic in its class
state of the art electronics provide supremely low noise
transformerless design for pristine sound quality
Switchable pre-attenuation pad
provides an extended dynamic range
enables close-miking of loud sources
prevents overloading your audio interface or mixer
Switchable low-cut filter
eliminated low frequency rumble or footfall noise
compensates for excessive bass with close-mic techniques
Gold-plated XLR connector
for loss-free and reliable signal connection
All-metal housing with premium finish
efficient rejection of any electrical interference and noise
high-quality finish ensures a great look for many years
Factory-matched stereo pair (sE7 Matched Pair only)
every pair is selected from hundreds of individual microphones
identical performance and highest possible consistency
Standard accessories
windscreen to avoid wind noise
robust mic clip with thread adapter to fit with any mic stand
Standard accessories (sE7 Matched Pair only)
Two windscreens to avoid wind noise
Two robust mic clips with thread adapters to fit with any mic stand
Capsule Type: 1/2“ back-electret condenser capsule
Polar Pattern: Cardioid
Frequency range: 20 Hz - 20 kHz
Sensitivity: 19 mV/Pa (-34.5 dBV)
Max SPL: 136 / 156 dBSPL (0/20 dB Attenuation pad)
Equivalent noise level: 16 dB(A)
Dynamic range: 120 / 140 dB (0/20 dB Attenuation pad)
Signal to Noise Ratio: 78 dB
Low-cut filter: 80 Hz, 6 dB/Oct, switchable
Attenuation Pad: 20 dB, switchable
Powering: 48 Volts according to IEC 61938
Electrical Impedance: <200 Ohms
Recommended load impedance: >1k Ohms
Current consumption: 3.0 mA
Connectivity: 3-pin male XLR connector
Dimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in)
Weight: 128 g (4.52 oz.)
2x sE7 microphone
2x mic clip (with thread adapters)
2x wind screens
High quality condenser capsule
designed for neutral, balanced sound quality
ultra-thin diaphragm for excellent transient response
cardioid polar pattern - ideal for most studio or stage applications
The quietest mic in its class
state of the art electronics provide supremely low noise
transformerless design for pristine sound quality
Switchable pre-attenuation pad
provides an extended dynamic range
enables close-miking of loud sources
prevents overloading your audio interface or mixer
Switchable low-cut filter
eliminated low frequency rumble or footfall noise
compensates for excessive bass with close-mic techniques
Gold-plated XLR connector
for loss-free and reliable signal connection
All-metal housing with premium finish
efficient rejection of any electrical interference and noise
high-quality finish ensures a great look for many years
Factory-matched stereo pair (sE7 Matched Pair only)
every pair is selected from hundreds of individual microphones
identical performance and highest possible consistency
Standard accessories
windscreen to avoid wind noise
robust mic clip with thread adapter to fit with any mic stand
Standard accessories (sE7 Matched Pair only)
Two windscreens to avoid wind noise
Two robust mic clips with thread adapters to fit with any mic stand
Capsule Type: 1/2“ back-electret condenser capsule
Polar Pattern: Cardioid
Frequency range: 20 Hz - 20 kHz
Sensitivity: 19 mV/Pa (-34.5 dBV)
Max SPL: 136 / 156 dBSPL (0/20 dB Attenuation pad)
Equivalent noise level: 16 dB(A)
Dynamic range: 120 / 140 dB (0/20 dB Attenuation pad)
Signal to Noise Ratio: 78 dB
Low-cut filter: 80 Hz, 6 dB/Oct, switchable
Attenuation Pad: 20 dB, switchable
Powering: 48 Volts according to IEC 61938
Electrical Impedance: <200 Ohms
Recommended load impedance: >1k Ohms
Current consumption: 3.0 mA
Connectivity: 3-pin male XLR connector
Dimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in)
Weight: 128 g (4.52 oz.)
Reviews, Tests en Opmerkingen
Snel geleverd, goede service. - Job, Haarlem
Bedankt voor de zeer snelle en duidelijke telefonische hulp. Zeer tevreden - Jolien
Fijn om advies van echte experts te krijgen - mvr Hermans
Meer guitar gear zoals de sE7 Matched Stereo Pair
Professioneel advies van XLmusic.nl Experts? Stel een vraag