HardWire HT-2 Gitaar Stemmen/Pro pedaal apparaat
Alternatieven:
Aanbieding: €149.95
-- Korting:49%
Op voorraad Direct Leverbaar
XLservice
Officiele Merk Garantie
2 jaar garantie
4350+ Afhaallocaties in Nederland
2300+ Afhaalpunten in Belgie
€75.00
Gratis Verzending
Niet Leverbaar -> Bekijk alternatief
Niet Leverbaar -> Bekijk alternatief Op voorraad Direct Leverbaar XLservice Officiele Merk Garantie 2 jaar garantie 4350+ Afhaallocaties in Nederland 2300+ Afhaalpunten in BelgieOmschrijving
Gitaar Stemmen met het HardWire HT-2 Pro pedaal apparaat. Chromatische te gebruiken, geen kwaliteitsverlies, handig voor podium of studio gitarist.
Gitaar stemmen kan zeer professioneel namelijk met een HardWire pedaal van DigiTech. Eindelijk een digitaal tuner pedaal die het oorspronkelijke geluid geheel in tact laat: dankzij de ‘True Bypass’ schakeling. Deze hoogwaardige tuner heeft een High-Visibility Blue ‘in-tune’ LED en werkt ook in stroboscoop mode.
De HCT Tuner is met zowel ‘mute’ als ‘thru’ uitgang uitgerust, heeft diverse modes en kan allerlei stemmingen aan. Je kunt deze dus altijd zo tussen je gitaar en je effecten houden zodat stemmen op een podium of thuis of in de studio snel, precies en gemakkelijk gaat.
Werkt op bijgeleverde 9V batterij of optionele DC adapter (PS200R).
Nu is er ook het HT-6 poly gitaar stemapparaat pedaal waarmee je zelfs 6 snaren tegelijk kunt stemmen, ff checken.
De HCT Tuner is met zowel ‘mute’ als ‘thru’ uitgang uitgerust, heeft diverse modes en kan allerlei stemmingen aan. Je kunt deze dus altijd zo tussen je gitaar en je effecten houden zodat stemmen op een podium of thuis of in de studio snel, precies en gemakkelijk gaat.
Werkt op bijgeleverde 9V batterij of optionele DC adapter (PS200R).
Nu is er ook het HT-6 poly gitaar stemapparaat pedaal waarmee je zelfs 6 snaren tegelijk kunt stemmen, ff checken.
HT-2 Details
Mode Button - Selects the display mode (Normal or Strobe) for
the Tuning LED Array. The modes are labeled below the last two
LEDs of the Tuning LED Array.
Input - Connect your instrument here. This jack enables battery
power to the pedal when connected. To prolong battery life, disconnect
the cable from the Input jack when not in use. If the optional
Harman PS200R power supply is used, cables can remain connected.
Foot Switch Release Pins - These two pins are spring loaded
hinges that hold the Foot Switch in place. See page 13 for information
on accessing and changing the battery.
Foot Switch - Turns the Tuner on and off.
Thru Output - Connect this output to the input of your amp or
the input of another pedal if you want the output signal from your
instrument to be audible when the tuner is enabled.
Mute Output - Connect this output to the input of your amp or
the input of another pedal if you want the output signal from your
instrument to be muted when the tuner is enabled.
Tuning Button - Selects the different tuning references. The tuning
references are labeled below the first 9 LEDs of the Tuning LED Array.
DC Adapter Jack - Connect (an optional) Harman PS200R
power supply to this jack. Use the proper supply for your area’s
mains line voltage.
LED Indicator - Lights when the effect is turned on. When battery
power is low (approximately 15 minutes before it dies), the
Indicator LED begins to dim giving you advanced warning that very
shortly you will need to replace the battery.
Note Display - Displays the note being tuned. The decimal point
in the lower right corner of the display will light to indicate the
sharp of the note is played (i.e. G. = G#).
Tuning LED Array - These eleven LEDs are used for displaying
whether the note being tuned is sharp or flat. They are also used
to indicate tuning references and tuning LED array modes.
Controls - Mode Button, Tuning Button, On/Off Pedal
Jacks - Input, Mute, Thru
Input Impedance - >1 MÙ - tuner on
Input Impedance - true hardwire bypass - tuner off
Power Supply - 9V Alkaline Dry Battery or
Harman PS200R 9V DC power supply
Current Draw - 40 mA (typical at 9V DC)
Power Consumption - 350 mW (typical w/optional PS200R power supply)
Dimensions - 5.25”(L) x 3.5”(W) x 2.15”(H)
Weight - 1.3 lbs.
Optional Power Supply:
PS200R-100 (100V~ 50/60Hz)
PS200R-120 (120V~ 60Hz)
PS200R-230 (230V~ 50Hz)
PS200R-240 (240V~ 50Hz)
the Tuning LED Array. The modes are labeled below the last two
LEDs of the Tuning LED Array.
Input - Connect your instrument here. This jack enables battery
power to the pedal when connected. To prolong battery life, disconnect
the cable from the Input jack when not in use. If the optional
Harman PS200R power supply is used, cables can remain connected.
Foot Switch Release Pins - These two pins are spring loaded
hinges that hold the Foot Switch in place. See page 13 for information
on accessing and changing the battery.
Foot Switch - Turns the Tuner on and off.
Thru Output - Connect this output to the input of your amp or
the input of another pedal if you want the output signal from your
instrument to be audible when the tuner is enabled.
Mute Output - Connect this output to the input of your amp or
the input of another pedal if you want the output signal from your
instrument to be muted when the tuner is enabled.
Tuning Button - Selects the different tuning references. The tuning
references are labeled below the first 9 LEDs of the Tuning LED Array.
DC Adapter Jack - Connect (an optional) Harman PS200R
power supply to this jack. Use the proper supply for your area’s
mains line voltage.
LED Indicator - Lights when the effect is turned on. When battery
power is low (approximately 15 minutes before it dies), the
Indicator LED begins to dim giving you advanced warning that very
shortly you will need to replace the battery.
Note Display - Displays the note being tuned. The decimal point
in the lower right corner of the display will light to indicate the
sharp of the note is played (i.e. G. = G#).
Tuning LED Array - These eleven LEDs are used for displaying
whether the note being tuned is sharp or flat. They are also used
to indicate tuning references and tuning LED array modes.
Controls - Mode Button, Tuning Button, On/Off Pedal
Jacks - Input, Mute, Thru
Input Impedance - >1 MÙ - tuner on
Input Impedance - true hardwire bypass - tuner off
Power Supply - 9V Alkaline Dry Battery or
Harman PS200R 9V DC power supply
Current Draw - 40 mA (typical at 9V DC)
Power Consumption - 350 mW (typical w/optional PS200R power supply)
Dimensions - 5.25”(L) x 3.5”(W) x 2.15”(H)
Weight - 1.3 lbs.
Optional Power Supply:
PS200R-100 (100V~ 50/60Hz)
PS200R-120 (120V~ 60Hz)
PS200R-230 (230V~ 50Hz)
PS200R-240 (240V~ 50Hz)
Reviews, Tests en Opmerkingen
Snel geleverd, goede service. - Job, Haarlem
Bedankt voor de zeer snelle en duidelijke telefonische hulp. Zeer tevreden - Jolien
Fijn om advies van echte experts te krijgen - mvr Hermans
Meer guitar gear zoals de HT-2
-
Comica
Lightning Pro Mic Cable
34.95 -
Lightning Plug
-
Sonectrix
iPad-Lightning-USB
19.95 -
Lightning USB Hub
27.95
Professioneel advies van XLmusic.nl Experts? Stel een vraag
